Reversing The Door; Energy Saving Tips - Dometic RH430LD Instructions De Montage Et De Service

Operation
6.1 Changing the decorative plate
To change the decorative plate proceed as shown in fig. 4 to fig. 7 on page 4.
6.2 Mounting the sliding hinge (optional)
You can mount a sliding hinge that allows the cooling device door to be opened
together with the door of the built-in cabinet (fig. 8, page 5, to fig. m, page 8).
6.3

Reversing the door

Reverse the door as shown in fig. n to fig. r on page 9.
For doors with a sliding hinge proceed as shown in fig. p to fig. q on page 9.
7 Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
•
Before starting your new cooling device for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please also refer to the chapter "Cleaning and maintenance" on
page 18).
•
If a few drops of water form inside the cooling device after it has been
cooling for a lengthy period, the cooling device is not defective. Air
moisture condenses to water when the temperature in the cooling
device falls. Wipe the water out with a dry cloth if necessary.
7.1

Energy saving tips

•
Choose a well ventilated location which is protected from direct sunlight.
•
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
•
Do not open the cooling device more often than necessary.
•
Do not leave the cooling device open for longer than necessary.
16
All manuals and user guides at all-guides.com
RH4xxLD, RH4xxLG
EN