Siemens TE 803 Serie Mode D'emploi page 25

Empty drip tray
Replace drip tray
● Empty the drip tray
The appliance is ready for use again.
Duration: approx. 36 minutes.
functions of descaling and cleaning.
suggests this service programme.
Cleaning and service
Short rinse
milk system
calc'nClean
The start button 8
ent calc'nClean processes are running. The
igures on the top right indicate the progress
of the programme.
If there is a water ilter in the
before the service programme is run.
à b u t t o n
●
calc'nClean start

●
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray
●
it clicks into place.
TE803_806_1RW.indb 21
All manuals and user guides at all-guides.com
and reinsert it.
 start
lashes while the differ-
3
.
; the display
and reinsert it.
Place 1 l container
Place suction pipe in container
●
least 1 l under the milk frother
●
the container.
●
rinses twice.
Cleaning
Open powder compartment
●
Insert Siemens cleaning tablet
and close drawer
●
and close.
Remove filter start

If the water ilter is activated, the dis-
Info:
play will prompt you to remove the ilter,
Add 0.5 l water and descaler
●
tablets in it.
●
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid start

Info: If there is not enough descaling solu
prompt is displayed. Pour in descaling solu-
Clean and refill water tank
start

●
en
start

.
. The appliance
.
again.
start

. The descaling
-
again.
and reill it with
" mark.
21
08.05.2013 14:24:14