Siemens TE 803 Serie Mode D'emploi page 24

en
Add 0.5 l water and descaler
●
tablets in it.
●
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid start

Info: If there is not enough descaling solu
prompt is displayed. Pour in descaling solu-
Clean and refill water tank
start

●
●
programme now runs for about 1 minute
and rinses the appliance.
Descaling
Empty drip tray
Replace drip tray
● Empty the drip tray
Replace the ilter if one is being used. The
appliance is ready for use again.
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust ilm
washed out thoroughly before use.
the milk frother.
20
TE803_806_1RW.indb 20
All manuals and user guides at all-guides.com
start

Duration: approx. 8 minutes.
Cleaning and service
Descale
. The descaling Clean
The start button 8
ent cleaning processes are running. The
igures on the top right indicate the progress
- of the programme.
●
again. ●
Clean
●
and reill it with
" mark.
. The descaling
Empty drip tray
Replace drip tray
● Empty the drip tray
Position swivel arm
●
and reinsert it.
Cleaning
Open powder compartment
●
Insert Siemens cleaning tablet
and close drawer
●
Press start
●
Cleaning
lashes while the differ-
mark.
à b u t t o n 3
.
start

guide you through the programme.
and reinsert it. The
appliance rinses twice.
clicks into place.
and close it.
7 minutes.
 start
; the display
.
. The clean-
08.05.2013 14:24:14