Dismantling The Device - Dometic CE 88-ZF + Grill Notice D'utilisation

Using the device
➤ Open the lid of the device.
➤ Open the valve on the gas cylinder.
➤ Turn the control knob of the grill anti-clockwise from the neutral setting (0)
to the large flame setting.
➤ Press the control knob in and hold it in this position.
➤ Ignite the burner straight away at the gas outlet (fig. 5 1, page 4) using
a long match or a suitable lighter. Remove your hand quickly as soon as
the burner is lit.
Once the burner is lit, you can release the knob after approx.
10 seconds.
➤ If the burner goes out after releasing the knob:
Wait at least 60 seconds before you ignite it again.
➤ After it is ignited, check that the flames are burning on both sides along
the whole length of the burner pipe (fig. 5 2, page 4).
NOTE
I
Place the pan directly on top of the burner to gain the most heat.
7.6 Switching off the cooking/grilling unit
➤ Turn the control knob to the neutral setting.
✓ The burner goes out.
➤ If you will not use the device for a long period, then close the valve on the
gas cylinder.
7.7

Dismantling the device

CAUTION! Beware of burns
!
The device is very hot when you use it. Leave the device to cool
down before you clean, dismantle or transport it.
➤ Disconnect the device from the gas supply.
➤ Clean the device (see chapter "Cleaning the device" on page 15).
➤ Store the pan and rack away and close the lid.
14
All manuals and user guides at all-guides.com
CE 88-ZF + Grill
EN