Connecting The Device - Dometic MO 8952 Notice D'utilisation

Hobs and Combinations
The installation cutout has to be prepared according to the drawing (fig. 3,
page 4).
6

Connecting the device

6.1 Connecting the device to the gas supply
!
WARNING! Risk of injury
Only use propane or butane gas cylinders with a certified pressure
reduction valve and suitable head. Compare the pressure information
on the type plate with the pressure information on the propane or
butane gas cylinder.
You must use a rigid gas line for the connection.
Observe the following instructions for the connection:
• Observe the national requirements.
• Use only steel pipe 8 x 1 mm (welded, seamless steel or stainless steel)
• Fasten the gas line to the side or rear wall of the surrounding furniture parts so that
no loads are placed on the actuators.
• The entire gas line must be free of stress.
1. Connect the pipes as shown (fig. 4, page 5).
– Attach a sign above the device with the following text:
"WARNING!
When cooking, additional ventilation must be provided, for example, by open-
ing windows near the device.
The device must not be used as a space heater."
2. Open the gas supply.
!
WARNING! Risk of injury
Never check for leaks with an open flame or near sources of ignition.
3. Check all connections for leaks with leak spray.
There are no leaks if no bubbles form.
EN
Connecting the device
15