Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Product Dimensions
26-3/4"
(67.9 cm)
depth with
handle
24-1/4"
(61.6 cm)
All manuals and user guides at all-guides.com
36"
(91.4 cm)
cooktop
height
46-1/4"
(117.5 cm)
overall height
for tall
backguard
models
29-7/8" (75.9 cm)
29-7/8" width
width
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm)
countertop depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by ¹⁄₂" (13 mm) minimum.
13" (33.0 cm) max.
upper cabinet depth
30" (76.2 cm) min.
cabinet opening width
30-1/8" (76.5 cm)
opening width
18" (45.7 cm)
2" (5.1 cm) min.
min. clearance
countertop space to
upper side
side wall or other
cabinet to
combustible material
countertop
This shaded area
recommended for
24"
electrical outlet.
(61.0 cm)
(12.7 cm)
3"
(7.6 cm)
NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than ¹⁄₄" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal
cabinet.
If installing a range hood or microwave hood combination above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.
For minimum
clearance to
top of cooktop,
see NOTE.
This shaded area
recommended for
installation
of gas pipe.
10" (25.4 cm)
8"
(20.3 cm)
5"
(12.7 cm)
5"
2"
(5.1 cm)
5
Publicité
Table des Matières
