Medion MD 19601 Notice D'utilisation page 197

NOTICE!
Follow the instructions in the user manual!
• Bullet point/information on steps during operation

Instruction to be carried out
Declaration of Conformity (see "Declaration of Conformity" section):
Products that feature this symbol meet the requirements of the EC
directives.
Protection class II
Electrical appliances in protection class II are appliances that have
double and/or reinforced insulation throughout, and do not have an
option for connecting a protective earth. The housing of an electri-
cal appliance in protection class II, with surrounding insulating ma-
terial, might either form all of the additional or reinforced insulation,
or part of it.
DC current symbol
Polarity markings
Symbol denoting the polarity of the DC connector (according to IEC
60417).
On appliances carrying this marking, negative is on the inside and
positive on the outside.
S
Symbol for electrical switched-mode power supply
Transformer – short circuit-proof
A transformer in which the temperature does not exceed specified
limits if the transformer is overloaded or short-circuited and which
continues to meet all the requirements specified in the relevant
standard once the overload or short circuit has been rectified.
Indoor use
Appliances with this symbol are intended solely for indoor use.
Dispose of the appliance in compliance with environmental regula-
tions (see "13. Disposal" on page 225).
198