Surface Units - Knob-Free Models - GE JB860 Manuel

Surface Units - Knob-Free Models

NOTE: All protective packing must be removed from all parts. It cannot be removed if it is baked on.
Radiant Glass Cooktop
The surface unit will cycle on and off to maintain your
selected control setting. This is normal.
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
■ c ome on when the unit is hot to the touch.
■ s tay on even after the unit is turned off.
■ s tay on until the unit is cooled to approximately
150°F.
Dual and Triple Surface Units (on some models)
The surface unit has 2 or 3 cooking sizes to select from
so you can match the size of the unit to the size of the
cookware you are using.
Sync Burner Feature
This feature allows you to synchronize the left rear and left
front burners to create one large cooking zone for griddle
cooking. To use this feature, press the Sync Burners pad.
You may then use either the left front or left rear +/- pads
to adjust the power of both burners simultaneously. To
unsync, press either burner's On/Off pad.
Using the Warming Zone
FOOD POISON HAZARD: Bacteria may grow in food at temperatures below 140°F.
WARNING
■ Always start with hot food. Do not use warm setting to heat cold food.
■ Do not use warm setting for more than 2 hours.
To Use the Warming Zone:
1. Touch the Warming Zone On/Off pad.
2. Use the + or - pad to choose the desired
Lo/Med/Hi setting.
To Turn Off the Warming Zone:
Touch the Warming Zone On/Off pad.
8
To Turn On a Surface Unit:
1. Touch the On/Off pad, then touch the + or - pad.
2. Use the + or - pad to choose the desired power setting.
3. For the dual and triple surface units, touch the
Burner Size pad to select the
desired burner size.
To Turn Off a Surface Unit:
Touch the On/Off pad.
Models with a Tri-Ring
surface element only.
49-80764 Rev. 5