Cleaning And Troubleshooting Your Waterpik® Water Flosser; Service & Maintenance - Waterpik WF-13CD Mode D'emploi

8 8
CLEANING AND TROUBLESHOOTING YOUR WATERPIK® WATER FLOSSER
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial solutions. After using any special solution, rinse
unit to prevent clogging by partially filling reservoir with warm water and running unit with tip pointed into sink until unit is empty.
Cleaning
Never immerse unit in water. Before cleaning, unplug from the electrical outlet. Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser to wipe exterior.
The water reservoir is removable for easy cleaning and is top rack dishwasher safe. It is recommended that the reservoir is removed
and cleaned weekly.
Removing Hard Water Deposits
Add 1 tablespoon of white vinegar to a full reservoir of warm water. Point the handle and tip into sink. Turn unit ON (I) and run until
reservoir is empty. Rinse by repeating with a full reservoir of clean warm water.
Battery Care and Disposal
The unit will not charge if the switch is in the ON(|) position. If you use your Water Flosser once a day or less, it is recommended you
charge it overnight, once a week. If you use it twice a day or more, charge the unit more frequently. Do not run the batteries down
completely as this may shorten the lifespan of the batteries and will require charging the unit for 24 hours to obtain a full charge.
If the Water Flosser is to be stored for an extended period of time (six months or more), be sure to fully charge it prior to storage.
The unit contains a Nickel Metal Hydride battery. At the end of the battery life, please recycle the unit at your nearest recycle center
per local or state requirements.
Service Maintenance
Waterpik® Water Flossers have no consumer-serviceable electrical items and do not require routine service maintenance.
For all parts and accessories go to www.waterpik.com.
You may also call our toll-free customer service number at 1-888-226-3042. Refer to the serial and model numbers in all
correspondence. These numbers are located on the bottom of your unit.
Still have questions? Go to www.waterpik.com.