Cleaning And Troubleshooting Your Waterpik - Waterpik WP-250 Mode D'emploi

CLEANING AND TROUBLESHOOTING YOUR WATERPIk

Cleaning
Before cleaning, unplug from the electrical outlet.
Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning and
is top rack dishwasher safe.
NOTE: Remove reservoir valve before placing
reservoir in dishwasher.
Remove
Removing Hard Water Deposits
Add 2 tablespoons of white vinegar to a full reservoir
of warm water. Set pressure control dial to high, point
the handle and tip into sink. Turn unit ON and run
until reservoir is empty. Rinse by repeating with a full
reservoir of clean warm water.
Leakage
If leaking due to a damaged hose, replacement hoses and
handles can be purchased at www.waterpik.com or contact
Water Pik Inc. customer service for a self service repair kit.
If leakage occurs from the reservoir, ensure the
valve is right side up or contact Water Pik Inc.
customer service for a replacement valve.
Service Maintenance
Waterpik
electrical items and do not require routine service
maintenance. For all accessories go to www.waterpik.com.
You may also call our toll-free customer service number at
Replace
1-888-226-3042.
Refer to the serial and model numbers in all correspondence.
These numbers are located on the bottom of your unit.
WATER FLOSSER
®
Water Flossers have no consumer-serviceable
®
9