Christopeit Sport Cambridge II Notice De Montage Et D'utilisation page 15

All manuals and user guides at all-guides.com
Step 5:
Attach the seat frame (45) at main frame (1).
1. Place the seat frame (45) against the main frame (1) and con-
nect the sensor cable (42) with connection cable (36).
2. Place the seat frame (45) into the holder of main frame (1), so
that the holes pattern and screw the seat frame (45) at main frame
(1) loosely by using screw M10x80 (34), washer (37) and nut (38).
(The seat frame (45) should be fold up easily.)
3. Secure the seat frame (45) during training through screw in the
star grip screw (33) into main frame (1) and use washer (15).
4. Take the computer (12) that has been supplied out of the pa-
ckaging and insert the batteries (Type "AA"-1.5 V pencells) by
watching for the right polarity on the back of the computer (12).
(Batteries for the computer are not included in this item. Please
buy them at your located market.) At the bottom of the computer
is in the middle an arrest which the computer can be unlocked
and removed from the case.
Step 6:
How to fold up.
1. To storage the item, screw out the star grip screw (33) and fold
up the Seat frame (45) of item into vertically position. Secure this
position with star grip screw (33) and washer (15) into the appro-
priate position at side of main frame (1).
Step 7:
Checks
1. Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarise yourself with the machine
at a low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as
these may be required for repairs or spare parts orders becoming
necessary later.
15