Publicité
Les langues disponibles
Les langues disponibles
9
ABOUT THE CODES
F
– The F code means your unit is empty and needs to be
FILLED with water.
CL
– Your CONTROLS ARE LOCKED on the current setting.
Activate the control lock by holding the power button for
five seconds, until CL appears. Your Space Saver will lock
on the current fan and humidity settings. Release the lock by
pressing the power button again for five seconds until the
display flashes CL three times, letting you know the lock is off.
CF
– The CF code triggers after 720 hours of use and means
it's time to CHECK YOUR FILTER (wick). Unplug your unit and
check your wick. If your wick is still in good shape, simply
clear the code by plugging your humidifier back in. If your
wick needs replacing, follow these quick steps:
1.
Remove the wick from the frame by gently squeezing the
tabs around the wick frame. Do not discard your frame.
2.
Insert a new 1043 Super Wick® in the frame and snap the
frame shut.
3.
Put the wick and frame back into the unit with the FRONT
label facing the front of the unit.
HOW TO CLEAN YOUR SPACE SAVER
Regular cleaning is important for preventing mold, mildew,
and other bacterial growth in your humidifier. It also keeps
your Space Saver working its best.
1. Let the unit run until it's empty, then turn it off and
unplug it.
2. Remove everything from the cabinet. Throw your wick
away if it is time to replace it. Otherwise, remove it from
the wick frame (keep your frame) and put the wick in a
sink while you finish cleaning your Space Saver.
3. Pour out any remaining water from the cabinet.
4. Fill the cabinet half-full with water and add 1 cup of
white vinegar. Let sit for 20 minutes. To disinfect,
replace the vinegar with 1 teaspoon of bleach.
Do not mix vinegar and bleach.
5. After 20 minutes, empty the cabinet.
6. Dampen a sponge with white vinegar, wipe
down the cabinet and wick platform, then rinse
everything thoroughly. To disinfect, replace the
vinegar with bleach.
7. Rinse the float with clean water only.
8. Wipe everything dry and replace the wick, if needed.
Then reassemble.
When storing your Space Saver, discard the used wick (keep your
wick frame) and disinfect the unit using the directions above. Dry the
unit thoroughly, and store in a temperature-regulated area. Do not
install a new wick until you are ready to use your humidifier again.
10
Publicité
