Aircare SPACE SAVER Manuel page 3

LET'S GET YOUR 836000HB UP AND RUNNING
If your unit has an analog control with a knob, you have
1
B
the Space Saver 836000HB. Remove the Space Saver
from its packaging. In this box, you should have:
a.
Cabinet
#4V3395020VWH
b.
Fan assembly
#1B73184-R
c.
1043 Super Wick®
All 1043 WICKS
d.
Wick frame
#4V3398020GRYP
e.
Float
#1B5060400
f.
Float rod
#1B72125
g.
Float rod retainer
#1B5460590
c
h.
Four casters
#1B5460070
i.
Owner's manual
#1B73379
If you are missing any parts, or need
replacement parts, call us at 800.547.3888 or
visit our website aircareproducts.com.
HEART We hope you love your Space Saver.
3
a
d
b
f
h
g
e
Prefer to see a video?
Watch the Space Saver set-up at
aircareproducts.com/support.
CAMERA
SCAN THE CODE TO THE RIGHT
WITH YOUR PHONE'S CAMERA
2
Remove everything from the cabinet.
Do not throw away the small
Styrofoam cube – this is your float. Turn the
cabinet over and insert the casters snugly into
the bottom. Just use your hands! Using tools
can crack the cabinet.
3
Turn the cabinet upright. Locate the
PLACE WICK HERE label inside your
Space Saver cabinet. Remove the tape from your
wick frame and place the wick and wick frame in
the cabinet with the side labeled FRONT facing
the front, curved side of the unit.
4
Place the float (with the float rod as
pictured) in the square area in the
bottom of the cabinet. Secure the rod to the
humidifier with the float retainer, as shown.
i
5
Put the fan assembly on the base.
Make sure the top of the float rod
makes a solid connection with the fan switch
inside the fan assembly. The fan switch looks
like a small, silver diving board.
FLOAT RETAINER
4