Aircare SPACE SAVER Manuel page 4

2 INCHES
Space Saver
831000
with digital controls
5
6
Put your Space Saver in the most
centrally-located room of your home. It
should be on a level surface against an interior
wall. Make sure it's at least two inches from
the wall so the humidistat (on the cord) can
accurately read your humidity.
More about positioning:
To maximize humidity circulation, put your unit near a cold air return.
•
If you prefer to put your unit in the room where humidity is most
•
needed, you can! But the humidity won't circulate as well with this
method.
Don't put your humidifier under a window, as condensation may occur.
•
Put the unit on the bottom floor of a multi-story home.
•
7
To fill your digital Space Saver, remove
A
the louver from the front grille. Fill the
cabinet with water up to the FILL HERE
line marked inside the cabinet. Only pour water
through the front grille and never through the
fan. Your Space Saver holds 6 gallons of water.
Proceed to step 8 on the next page.
About water additives:
Do not use essential oils in your Space Saver.
•
Do not use water softeners.
•
We recommend our Essick Air Bacteriostat to help inhibit
•
mold growth.
7
To fill your analog Space Saver, fill
B
the cabinet with water up to the FILL
HERE line marked inside the cabinet. Only
pour water through the lower front grille
and never through the fan. Your Space Saver
holds 6 gallons of water.
About water additives:
Do not use essential oils in your Space Saver.
•
Do not use water softeners.
•
We recommend our Essick Air Bacteriostat to help inhibit
•
mold growth.
8
Wait 20 minutes for the wick to become
fully saturated, then proceed to step 9.
2 INCHES
Space Saver
836000HB
with analog controls
6