Functional Description - Bosch GDS 18 E Professional Notice Originale

14 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range of
dimension.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Suspension hook
2 Thumbwheel for speed preselection
3 On/Off switch
4 Rotational direction switch
5 Tool holder
6 Tool bit
The accessories illustrated or described are not includ-
ed as standard delivery.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
1 609 929 M70 | (26.10.07)
All manuals and user guides at all-guides.com
Technical Data
Impact Wrench
Article number
Rated power input
Output power
No-load speed
Rotational speed under
load
Max. torque for hard/
soft screwdriving appli-
cation according to
ISO 5393
Right/left rotation
Screw- Ø
Tool holder
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
30.10.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
GDS 18 E
Professional
0 601 436 8..
W 500
W 270
800 – 1900
rpm
500 – 1300
bpm
70 – 250/
Nm 50 – 160
M 6 – M 18
½ "
kg 3.2
/ II
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools