Disposal And Recycling - EINHELL TE-CS 18/165-1 Li Solo Instructions D'origine

re that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 10 and
40 °C. Store the electric tool in its original pa-
ckaging.
Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb 22 Anl_TE_CS_18_165-1_Li_Solo_SPK13.indb 22
GB
- 22 -
12.05.2022 15:07:57 12.05.2022 15:07:57