Installation Instructions; Step 1 - Unpack Air Conditioner; Step 2 - Install Exhaust Nozzle To Main Window Panel; Step 3 - Install Main Window Panel And Extension Panels - Haier HPP08XCR Instructions D'installation Et Guide De L'utilisateur

INSTALLATION INSTRUCTIONS

STEP 1 - UNPACK AIR
CONDITIONER
WARNING
Excessive Weight Hazard
Use two or more people to move and install air
conditioner.
Failure to do so can result in back or other injury.
•
Remove packaging materials. Save the carton and the
foam packaging for storing the air conditioner when not
in use.
NOTE: There are NO packing materials inside the
air conditioner to remove—Do Not open the cabinet.
•
Properly dispose of/recycle all packing material.
•
Handle the air conditioner gently.
•
Keep the air conditioner upright and level. Do not set the
air conditioner on its side, front, back or upside down.
STEP 2 - INSTALL EXHAUST
NOZZLE TO MAIN WINDOW PANEL
1. Hold the main window panel so that the L-shaped edges
of the panel are facing you.
a
2. Align the exhaust nozzle with the slots in the opening,
and then insert and slide the nozzle to access the hole
from the back of the main window panel.
a
b
3. Turn the main window panel over, so that the nozzle is
away from you. Insert a flat screw through the hole to
fasten the window panel to the adapter.
NOTE: On a dual hose unit, install the smaller hose
nozzle to the left-hand hole in the panel.
STEP 3 - INSTALL MAIN WINDOW
PANEL AND EXTENSION PANELS
NOTE: Depending on the size of your window opening,
use the main panel and one or both of the extension
panels.
1.
A L-Shaped
Edges
A Main Window
Panel
B Exhaust
Nozzle
2.
3.
5
a
Open the window and place the main window panel into
the window.
NOTE: The window assembly is designed to
accommodate either a vertical slide or horizontal
slide window.
Vertical Slide Window
A Main Window Panel
a
Horizontal Slide Window
a
Adjust the extension panel(s) to fit the width or height
of the window as shown.
NOTE: Some window installations may require the
extension panels to be trimmed.
Depending on the number of extension panels used, use
two or four flat screws to secure the main panel to the
extension panel(s).
Flat
A
Screw
A Main Window Panel