Before Using For The First Time; Basic Operation - Bosch BGB8 Notice D'utilisation

Before using for the first time

Before using for the
first time
Prepare the appliance for use.
Installing the appliance
Place the handle onto the the hose
1.
and lock it in place.
→ Fig.
3
Engage the hose adapter into the
2.
air-intake opening in the lid.
→ Fig.
4
Connect the handle to the tele-
3.
scopic tube.
Connect the telescopic tube to the
4.
floor nozzle.
→ Fig.
5
Place the accessory support
5.
the telescopic tube.
→ Fig.
6
Place the crevice nozzle
6.
bottom onto the accessory support
1
.
→ Fig.
6
Place the brush ring
7.
holstery nozzle
→ Fig.
7
Place the upholstery nozzle
8.
the brush ring
the accessory holder
→ Fig.
6

Basic operation

Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Setting the telescopic tube
Unlock the telescopic tube.
1.
1
Depending on the appliance specifications
All manuals and user guides at all-guides.com
1
onto
1
from the
1
onto the up-
1
.
1
with
1
from above onto
1
.
Before using for the first time en
Set the required length of the tele-
2.
scopic tube.
→ Fig.
8
Switching on the appliance
Hold the mains plug and pull it out
1.
to the required length.
Insert the mains plug into the
2.
socket.
Press ⁠ .
3.
→ Fig.
9
Switching off the appliance
Press .
1.
Unplug the mains plug.
2.
Briefly pull on the mains cable and
3.
then let go.
a The power cord retracts automatic-
ally.
Transporting the appliance
Switch off the appliance.
1.
Stand the appliance upright on its
2.
end.
Slide the catch on the floor tool
3.
into the groove on the underside of
the vacuum cleaner.
→ Fig.
10
To overcome obstacles, transport
4.
the appliance by the handle.
Controlling the power
You can control the setting continu-
ously.
Turn the power control to the re-
1.
quired setting.
→ "Overview of the controls",
Page 30
Turn the telescopic tube with air
2.
flow regulator to the required posi-
tion.
→ Fig.
11
1
31