Removing The Shelf Holders; Door Reversibility - Electrolux SANTO 75338-2 DT Notice D'utilisation

34
Installation

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Door reversibility

WARNING!
Before carrying out any operations, remove the mains plug from the power socket.
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
1. Slide the bottom door off the middle
hinge (H). Remove the middle hinge by
unscrewing the fixing screws.
Make sure to remove the plastic spacer
inserted under the hinge.
A
B
C
H