Multitab Function; Demo Mode - AEG FAVORIT 99015 I Notice D'utilisation

80
Menu

MULTITAB FUNCTION

This function deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
Activating the multitab function
1. Open the menu option.
2. Go to Multitab and activate the multi-
tab function.
3. Press OK to confirm.
4. Press the return touchpad to close the
menu option.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Deactivate the multitab function.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
EURO Appliances - euappliances.info
All manuals and user guides at all-guides.com
Submenu
Option guide

Demo mode

On
Off
Back
Activate or deactivate the multi-
tab function before the start of a
programme. You cannot activate
or deactivate this function when a
programme operates.
The function stays on until you de-
activate it. Go to menu option and
deactivate the multitab function.
Description of the option
The display shows informa-
tion about the options.
Refer to ' Demo mode '.
To go back to the menu op-
tion.
DEMO MODE
With this option you can simulate a pro-
gramme.
Factory setting: off.
1. Open the menu option.
2. Go to Demo mode and activate the
option. The option is active when you
see DEMO in upper left corner of the
display.
Deactivate the Demo mode if you
want to use the appliance.