Rear Spacers - Electrolux EN3402AOW Notice D'utilisation

All manuals and user guides at all-guides.com
8.3 Location
A

8.4 Rear spacers

4
8.5 Levelling
The appliance should be installed well
away from sources of heat such as radia-
tors, boilers, direct sunlight etc. Ensure
that air can circulate freely around the
back of the cabinet. To ensure best per-
formance, if the appliance is positioned
below an overhanging wall unit, the mini-
mum distance between the top of the
B
cabinet and the wall unit must be at least
100 mm . Ideally, however, the appliance
should not be positioned below overhang-
ing wall units. Accurate levelling is ensur-
ed by one or more adjustable feet at the
base of the cabinet.
You can find the two spacers in the bag
2
with documentation.
Do these steps to install the spacers:
1.
2.
1 3.
3 4.
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
WARNING!
It must be possible to disconnect
the appliance from the mains
power supply; the plug must
therefore be easily accessible after
installation.
Release the screw.
Engage the spacer below the screw.
Turn the spacer to the right position.
Tighten again the screws.
ENGLISH 17