Door Reversibility - Electrolux SC 33010 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

76 electrolux

Door reversibility

Before carrying out any operations,
remove the plug from the power socket.
To change the opening direction of the
door, proceed as follows:
• To carry out the following operations,
we suggest that this be made with
another person that will keep a firm
hold on the doors of the appliance
during the operations.
• Open the door with the appliance in
the upright position. Unscrew the
screws and remove the upper door
plastic trim.
• Remove the little plastic cover from
the door plastic trim and refit on the
opposite side (d).
• Lay down the appliance back side
down.
• Remove the screw of the hinge cover
plug (a).
• Unscrew the upper hinge and remove
it (b).
• Unscrew the screw and remove the
door stopper (c).
• Remove the door.
All manuals and user guides at all-guides.com
• Remove using a tool the cover (e)
• Reinsert the cover (e) on the
• Reinsert the door .
• Pay attention that the front board of
• Fix the door stopper on the
• Position and fix the upper hinge (that
• Fix the screw of the new cover hinge
a
unscrew the lower hinge pivot (f)
and place it on the opposite side.
opposite side.
the doors are parallel to the front
board of the top.
opposite side.
can be found in the instruction for use
bag) on the opposite side .
(that can be found in the instruction for
use bag).
b
c

Publicité

Table des Matières
loading

Table des Matières