Hitachi DH 20DV Mode D'emploi Et Instructions De Securite page 24

English
4. Crushing operation (rotation + striking)
Bull point (Round type only)
(SDS-plus shank)
Code No. 303046
5. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw Drill chuck (13 VLR)
Code No. (includes chuck
981122 wrench)
Code No. 950275
6. Drilling holes (rotation only)
Drill chuck (13VLA)
(includes chuck
wrench)
Code No. 950272
Chuck wrench
1/2" (13 mm) drill chuck ass'y (includes chuck wrench) and chuck (for drilling into steel
or wood).
24
Chuck adaptor G
(SDS-plus shank)
Code No. 303623
Chuck wrench
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624