Dimm Slots - MSI H510I PRO WIFI Guide D'utilisation

DIMM Slots

DIMM Slots
Please install the memory module into the DIMM slot as shown below. Please install the memory module into the DIMM slot as shown below.
1
Memory module installation recommendation
⚠
Important
∙ Always insert memory modules in the DIMMB1 slot first.
∙ To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
Some memory modules may operate at a lower frequency than the marked value
∙
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
It is recommended to use a more efficient memory cooling system for full DIMMs
∙
installation or overclocking.
∙ The stability and compatibility of installed memory module depend on installed
CPU and devices when overclocking.
Please refer www.msi.com for more information on compatible memory.
∙
10
Overview of Components
DIMMB1
2
3
DIMMA1
DIMMB1