Dimm Slots; M2_1: M.2 Slot (Key M) - MSI H510M PRO Guide D'utilisation

DIMM Slots

Please install the memory module into the DIMM slot as shown below.
1
⚠
Important
To ensure system stability for Dual channel mode, memory modules must be of the
∙
same type, number and density.
∙ Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
It is recommended to use a more efficient memory cooling system for full DIMMs
∙
installation or overclocking.
The stability and compatibility of installed memory module depend on installed
∙
CPU and devices when overclocking.
∙ Please refer to www.msi.com for more information on compatible memory.

M2_1: M.2 Slot (Key M)

Please install the M.2 device into the M.2_1 slot as shown below.
3
Supplied
M.2 screw
1
Standoff
2
30º 30º
2
3
Overview of Components
2
11