Panasonic FZ-M1 Serie Instructions D'utilisation page 13

All manuals and user guides at all-guides.com
5 Setup Windows.
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the screen or tablet buttons, and
wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for a while,
but this is not a malfunction. Wait for a moment until the Windows setup screen ap-
pears.
l Setup of Windows will take approximately
Go to the next step, confirming each message on the display.
l
A When "Enable sensors" is displayed, touch [Enable this sensor].
B When the [User Account Control] screen is displayed, touch [Yes].
C At the [Display Rotation Tool] confirmation screen, touch [Yes].
The computer restarts automatically, and the setting is enabled.
l You can set the Wireless Network after the setup of Windows is complete.
CAUTION
l You can change the user name, password, image and security setting after setup of Win-
dows.
l Remember your password. If you forget the password, you cannot use Windows. Creating a
password reset disk beforehand is recommended.
l Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to
COM9, LPT1 to LPT9, LPT, &, space,
In particular, if you create a user name (account name) that includes the "@" mark, a
password will be requested at the log-on screen, even if no password has been set. If you
try to log on without entering a password, "The user name or password is incorrect." may be
displayed and you will not be able to log on to Windows (è "OPERATING INSTRUCTIONS -
Basic Guide").
6
A Touch (Start).
B Touch (Power) - [Restart].
l A portion of the Panasonic PC Settings Utility functions will be enabled after the com-
puter restarts.
7 Update the on-screen manual
A Connect to the internet.
an administrator.
For further information, refer to
B Update the on-screen manual.
and then touch [Support] - [Manual] - [Launch Manual Selector].
Follow the on-screen instructions.
8 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory default condition, in case,
for example, the recovery partition of the flash memory is damaged. We recommend
creating a recovery disc before you begin using the computer.
Refer to è Reference Manual "Recovery Disc Creation Utility" about creating the disc.
has turned off.
5 minutes / 10 minutes.
Follow the steps below.
If "Let's get connected" is displayed, you can select "Skip this step".
"Join a wireless network" screen may not appear.
Restart the computer
Sign in /
Connect to a network.
Double-touch the [Panasonic PC Settings Utility] on the desktop screen,
Double-click [Manual Selector] on the desktop.
@.
Log on to Windows as
13