Settings - Electrolux ESL 7220RO Notice D'utilisation

Programme
4)
5)
1) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
2) The appliance senses the degree of soil and the quantity of items in the baskets . It auto-
matically adjusts the temperature and the quantity of water, the energy consumption and the
programme duration.
3) This programme has a high temperature rinsing phase for better hygiene results. During the
rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
5) With this programme you can quickly rinse dishes to prevent remains of food to bond on
dishes and odours to form in the appliance. Do not use detergent with this programme.
5.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the op-
tions and the quantity of dishes can change the values.
5.2 Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Degree of soil
Type of load
• Fresh soil
• Crockery and
cutlery
• All
Water
1)
(l)
10.2
7 - 14
12.5 - 14.5
10
4
Programme pha-
ses
• Wash 60 °C
• Rinses
• Prewash
Energy
(kWh)
0.932
0.6 - 1.4
1.4 - 1.6
0.9
0.1
Write down the product number (PNC)
that is on the rating plate.
In user mode, the following settings
can be changed:
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of the
acoustic signal for end of programme.
ENGLISH
Options
• Multitab
Duration
(min)
225
40 - 150
154 - 164
30
14
25