Manual Adjustment; Electronic Adjustment - AEG GS45BV220 Notice D'utilisation

72
Setting the water softener
German degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.

Manual adjustment

Turn the water hardness dial to the position 1 or 2
(refer to the table).

Electronic adjustment

1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Press and hold function buttons (B) and (C) at the same time until the indicators of
function buttons (A), (B) and (C) flash.
3. Release function buttons (B) and (C).
4. Press function button (A),
• The indicators of function buttons (B) and (C) go off.
• The indicator of function button (A) continues to flash.
• The acoustic signals sound.
• The display shows the setting of the water softener (example:
acoustic signals = level 5).
5. Press function button (A) again and again to change the setting.
All manuals and user guides at all-guides.com
Water hardness
French degrees
(TH°)
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
mmol/l Clarke de-
grees
9,1 - 12,5 64 - 88
7,6 - 9,0 53 - 63
6,5 - 7,5 46 - 52
5,1 - 6,4 36 - 45
4,0 - 5,0 28 - 35
3,3 - 3,9 23 - 27
2,6 - 3,2 18 - 22
1,9 - 2,5 13 - 17
0,7 - 1,8 5 - 12
< 0,7 < 5
Water hardness ad-
justment
manually elec-
tronical-
ly
1) 10
2
9
1)
2
1) 8
2
7
1)
2
6
1)
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
and you hear five