Assembly; Notes - Assa Abloy ZI IKON +CLIQ Mode D'emploi

Assembly

Notes

!
Caution!
Inspect for damage: Damage on metal parts can lead to injuries. A
damaged locking cylinder is a safety and/or security risk. Always inspect
the packaging and the locking cylinder for damage. A damaged locking
cylinder must never be assembled. A damaged locking cylinder must
never be used.
Observe the specifications and regulations of inspection authorities:
The regulations of inspection authorities must be observed for the
installation of the +CLIQ electronic locking cylinder. Specifications of the
door manufacturer must also be observed.
Comply with the fire certification: The conformity of the fire certifica-
tions for all door components and the suitability of the +CLIQ electronic
locking cylinder must be checked for installation in a fire or smoke door.
Risk of injury due to sharp edges and chips: There is a risk of injury due
to sharp edges and chips from drilling or other cutting work. Take partic-
ular care to protect your eyes with suitable protective goggles. The work
may only be performed by an appropriately qualified person.
30 EN Assembly