Mounting The Profile Plate And The Control Console; Cable Connections - Festo 8034566 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10.2 Mounting the profile plate and the control console

10.3 Cable connections

© Festo Didactic 8034662
1
Profile plate
2
Hammer head nut, M6-32 (4 ea.)
3
Trolley
4
Serrated washer, J6.4 (4 ea.)
5
Washer, B-6.4 (4 ea.)
6
Socket head screw, M6x10 (4 ea.)
7
Sheet metal screw, 3.5x9 (2 ea.)
8
Control console
PLC board to station
1
If the SysLink 19" system plug module
is used: connect socket A to the SysLink
socket on the C interface using a
SysLink cable or the SysLink socket at
the station's digital I/O terminal.
PLC board to control console
2
If the SysLink 19" system plug module
is used: connect socket B to the SysLink
socket on the control console using a
SysLink cable.
PLC board to power supply unit
Insert the 4 mm safety plug into the
socket on the power supply unit.
PC to PLC
Connect your PC to the PLC via a
programming cable.
39

Publicité

Table des Matières
loading

Table des Matières