Dulevo SPARK 1000 BH Mode D'emploi Et D'entretien page 79

1000 BH - 1000 EH - 1000 YH
► Bin tipping lever (top unloading) (fig. 7): Pull this
lever to rotate the bin and empty its contents.
► Display (1, fig. 8): This displays the current battery
charge level expressed as a percentage, logos for
active functions, an hour counter showing the total
hours of use of the machine and any active alarms,
see the "Display alarms" section.
Menu button (2, fig. 8): On the EH version, this
►
button is only active in the "Technical menu". On
the YH version, it serves to display the hours of
functioning of the engine.
► Bin up/down switch (3, fig. 8): Lifts or lowers the debris bin.
► Speed control (4, fig. 8): Regulates the forward and reverse speed of the machine.
Direction selector (5, fig. 8): Turn this selector to engage forward or reverse travel.
►
► Main switch (6, fig. 8): Switches power to all machine functions on/off.
► Horn button (7, fig. 8): Press to sound the horn.
► Light switch (8, fig. 8): Turns the lights (OPTIONAL) on and off.
► Engine start switch (9, fig. 8): Starts and shuts down the engine.
► Suction switch (10, fig. 8): Switches suction on and off.
► Filter shaker button (11, fig. 8): Press and hold this button for 30 seconds to shake and
clean the suction filter. As soon as the shaker motor starts, the suction and drive motors
are switched off. You can select the "automatic filter shaker" function from the "Technical
menu". When this function is active, the filter shaker is automati-
cally switched on at the end of the set interval.
Bin up/down movement enabling button (1, fig. 29): Press this
►
button to enable bin movement by the bin up/down switch.
8
11
1 2
00:00
100%
10
7
3
START
9
2014-07
English
29
4 5
0
1
8 7 6
2
1
EN-27