Mounting The Wire Feeder With Fastening Plate (Optional) To The Robot En; Connecting The Wire Feeder Irob Feed En - Abicor Binzel iROB Feed 22/MP Mode D'emploi

6 Putting into operation
6.2 Mounting the wire feeder with fastening plate (optional) to the robot
NOTICE
• Please observe the information on the instruction leaflet iROB Bracket for the different robot types.
Please take note of the following information:
 Tab. 9 Options on page EN-9
6.3 Connecting the wire feeder iROB Feed
NOTICE
• Observe the operating instructions of the welding components, such as the robot welding power
Intermediate cable assembly
The following figure shows iROB Feed 22 in the version with the wire feeder mounted on the right. The
layout of
4
12 11
1 Compressed air inlet
2 Connecting socket
3
Gas connection
Fig. 5 Connection of the intermediate cable assembly
EN - 12
,
source iROB Pulse cooling unit iROB Cool and welding torch.
iROB Feed
MP is different.
1 2
10 9 8
4 Power cable
5 Power cable connection
6
Coolant supply connection
3
22
MP
7 6
7 Coolant return connection
8 Coolant supply hose
9
Coolant return hose
iROB Feed
4
5
10 Gas hose
11 Control lead
12 Compressed air hose
BAL.0331.0 • 2019-03-11