Table des Matières
Publicité
INTERFACES (MX100TP only)
Full digital remote control facilities are available through the USB, RS232, LAN and GPIB interfaces.
Setting and readback resolutions are the same as for the Output and Meter specifications
respectively.
RS232:
USB:
LAN:
GPIB:
Remote Command
Processing Time:
GENERAL
AC Input:
Power Consumption:
Operating Range:
Storage Range:
Environmental:
Safety & EMC:
Size:
Weight:
Options:
Standard 9-pin D-connector. Baud rate 9600.
Standard USB 2.0 hardware connection.
Ethernet 100/10base-T hardware connection. 1.4 LXI Core 2011.
Conforms with IEEE488.1 and IEEE488.2.
Typically 120ms (80ms min, 160ms max) between receiving the
command terminator for a step voltage change at the instrument and
the output voltage beginning to change.
115V – 240V AC ± 10%, 50/60Hz.
Installation Category II.
500VA max.
+5ºC to +40ºC, 20% to 80% RH.
−40ºC to + 70ºC.
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1 & EN61326-1.
For details, request the EU Declaration of Conformity for this
instrument via http://www.aimtti.com/support (serial no. needed).
210 x 130 x 375mm (WxHxD) half rack width x 3U height.
4.9kg
19-inch rack kit for one or two units.
Page 49
Publicité
Table des Matières
