Replacing The Battery - Atlantis Host Power 1001 Mode D'emploi

1.11 Replacing the Battery

The Following Precautions Should be Observed When Working on Batteries:
Remove watches, rings, or other metal objects.

Use tools with insulated handles.

Wear rubber gloves and boots.

Do not lay tools or metal parts on top of batteries.

Disconnect charging source prior to connecting or disconnecting battery

terminals.
Before beginning the replacing of the battery You have to switch-off all the device
and detach AC cable from the wall receptacle.
Use a cross-type screwdriver to remove the two top cover screws and slide

back the cover Please refer to the figures STEP 1 through STEP 4.
38