Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Test
Under Normal Utility condition, push the "On" Switch for 3 seconds to execute
the Battery Self-test function. In case the battery is normal, it will enter into
Battery Backup Mode for 10 seconds then return back to Utility Mode. If the
battery voltage is detected lower than set limit, the Battery Replacement LED
will blink for 5 seconds then extinguish to stop self-test procedure. And if
battery is detected weak or dead, the Battery Replacement LED will steadily
illuminate.
Indicator
LED 6
LED2
Color
Green
Steady: Output Load is supplied
by Utility
Amber
Steady
Output Load is supplied by
Battery
Amber
Blinking every second (no alarm)
Battery charge (utility available)
Red
When Overload, short circuit or
Output Voltage Abnormal occurs
Red
Steady: Battery is dead
Description
(with
alarm):
37
Alarm
None
Every
2
seconds beep
before battery
Low and every
1 second beep
before battery
Cut off
None
Buzzerbeeps
continuously
None
Publicité
Table des Matières
