Panasonic WV-CZ352 Mode D'emploi page 26

■ Special Setting
1 Chroma Level (CHROMA GAIN)
2 Aperture Level (AP GAIN)
3 Pedestal Level (PEDESTAL)
Move the cursor to CHROMA GAIN, AP GAIN and PEDESTAL and move the "I" cursor to
your desired position.
4 PIX OFF Setting (PIX OFF)
In this setting, you can assign a blemish position and compensate the blemish.
1. Move the cursor to PIX OFF and press the SET button. The PIX OFF menu appears.
2. Select a number and press the SET button. The blemish compensation position
setting screen appears.
Move the "+" cursor to the place on the blemish position. After moving the "+" cursor to
a position where the blemish looks inconspicuous, press the SET button. Consequently,
the blemish compensation position is set up and the PIX OFF menu is restored.
After a blemish compensation position is set up, "*" is attached at the right of the number.
3. If you would like to delete a blemish compensation position, move the cursor to
the applicable number and press the SET button.
The blemish compensation position setting screen appears.
The blemish compensation position is deleted and "*" is also deleted from the right
of the number by pressing the RIGHT and LEFT buttons for more than 2 seconds.
26
** SPECIAL SETUP **
CHROMA GAIN ••••|••••
AP GAIN ••••|••••
PEDESTAL ••••|••••
- +
PIX OFF
ZOOM INVERSE OFF
FOCUS INVERSE OFF
REFRESH PUSH SET
CAMERA RESET PUSH SET
RET TOP END
** PIX OFF **
1* 2* 3* 4*
5* 6* 7* 8
000 000
RET TOP END
+
q
w
e
r
t
y
u
i