Publicité
Les langues disponibles
Les langues disponibles
■ Camera Setting
To Display the Camera Setup Menu
●
Move the cursor to CAMERA
appears.
1 Camera Identification Setting (CAMERA ID)
You can use the camera identification (CAMERA ID) to assign a name to the camera.
The camera ID consists of up to 16 alphanumeric characters.
The camera ID display can be switched on or off on the monitor screen.
To edit the CAMERA ID
1. Move the cursor to CAMERA ID.
2. The cursor on the letter "0" is highlighted.
3. Move the cursor to the character you want to edit.
4. After selecting the character, press the SET button.
The selected character appears in the editing area.
5. Repeat the steps above until all characters are edited.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press the SET button.
To erase all characters in the editing area
Move the cursor to RESET and press the SET button. All characters in the editing area
disappear.
, and press the SET button. The CAMERA SETUP menu
** CAMERA SETUP ** 1/2
CAMERA ID
OFF
ALC/MANUAL
ALC
SHUTTER
AUTO
AGC
ON(MID)
SENS UP
OFF
SYNC
INT
WHITE BAL
ATW1
MOTION DET
OFF
DNR
LOW2
RESOLUTION
NORMAL
BW MODE
** CAMERA SETUP ** 2/2
PRIVACY ZONE
OFF
AF MODE
STOP AF
ZOOM LIMIT
x 22
UPSIDE-DOWN
OFF
MIRROR
OFF
RET TOP END
CAMERA ID
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
().,'":;&#!?=
+-*/%$ÄÜÖÆÑÅ
SPACE
POSI RET RESET
................
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
15
Publicité
