Brother P-touch PT-2700 Guide De L'utilisateur page 19

AC Adapter
Connect the AC adapter directly to the P-touch.
1
Insert the plug on the AC adapter cord into the connector marked DC IN 9-9.5V
on the P-touch.
2
Insert the AC adapter plug into a standard electrical outlet.
• Turn the P-touch off before disconnecting the AC adapter.
• Disconnect the AC adapter from the P-touch and electrical outlet when you do not intend to
use the P-touch for an extended period.
• Do not pull or bend the AC adapter cord.
• Use only the AC adapter (AD-24) designed exclusively for your P-touch. Failure to observe
this may result in an accident or damage. Brother shall not assume any responsibility for any
accident or damage resulting from not using the specified AC adapter.
• Do not connect the AC adapter to a non-standard electrical outlet. Failure to observe this may
result in an accident or damage. Brother shall not assume any responsibility for any accident
or damage resulting from not using a standard electrical outlet.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory and clock settings will also be cleared.
For backup of memory and clock setting, when the AC adapter is unplugged, please use
AA-size alkaline batteries (LR6).
1
2
3
4
5
6
7
8
9
Power Supply 17