Publicité
Les langues disponibles
Les langues disponibles
The Feed & Cut function feeds 0.92" (23mm) of blank tape then cuts the tape.
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape
cassette.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the
tape to jam.
1
Hold down the
"Feed & Cut?" appears on the display.
2
Press the
The message "Feeding Tape... Please Wait" appears while the tape is fed, and
then the tape is cut.
Press
while "Feed & Cut?" is displayed to cancel tape feeding.
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0,
-1, -2) to make the screen easier to read. The default setting is "0".
1
Press the
"LCD Contrast" using the
the
or
key.
2
Select a contrast level using the
The screen contrast changes each time you press the
or
key, allowing you to set the most suitable
contrast.
3
Press the
• Press the
key to return to the previous step.
• Pressing the
"0".
Feeding Tape
key and press the
or
key to feed tape.
LCD Display
key to display the Mode menu, select
or
or
key.
key on the contrast setting screen sets the contrast to the default value
key.
key, and then press
or
key.
1
2
3
4
5
6
7
8
9
Feeding Tape
21
Publicité
