Brother P-touch PT-2700 Guide De L'utilisateur page 18

GETTING STARTED
Battery
1
After making sure that the power is off, remove the
battery compartment cover on the back of the
machine. If the batteries are already in the
machine, remove them.
Make sure that the power is turned off when
replacing batteries.
2
Insert eight new AA-size alkaline batteries (LR6),
making sure that the positive (+) and negative (-)
ends of the batteries match the positive (+) and
negative (-) marks inside the battery compartment.
23
Always replace all eight batteries at the same
time using brand new ones.
3
Attach the battery compartment cover by inserting
the three hooks at the bottom into the slots on the
machine, then pushing down firmly until it snaps
into place.
• Remove the batteries if you do not intend to use the P-touch for an extended period of time.
• When power is disconnected for more than two minutes, all text and format settings will be
cleared. Any text files stored in the memory and clock settings will also be cleared.
16 Power Supply
Power Supply