John Bean T 8026 Manuel D'utilisation page 10

EAL0383G31A
EAL0395G41A
EAL0408G62A
10
EAL0408G78A
EAL0395G39A
EAL0383G02A
Safety
• Use suitable lubricant to prevent tire friction
• Do not allow unauthorized persons to approach the
service area
Incorrect wheel mounting on the jaws may result in the
wheel coming loose
EAL0383G31A (USA) – EAL0408G78A (EC)
Risk (fragments of fl ying debris, cutting)
• When using this machine always wear safety
goggles, gloves and safety footwear
Failure to wear personal protective equipment increases
the risk of injury.
EAL0395G41A (USA) - EAL0395G39A (EC)
Risk of pinching or crushing hands and fi ngers.
• Only break the bead with the tool arm correctly
positioned.
• Stay outside the operating radius of the Mounting/
Demounting tool.
• Keep hands and fi ngers clear of rim edge during
Mounting/Demounting steps.
• Keeps hands and other parts of the body away from
moving surfaces.
• Only use approved accessories.
• Do not bypass safety devices.
Contact with moving parts may cause injury.
EAL0408G62A (USA) – EAL0383G02A (EC)
Risk of pinching or crushing hands and fi ngers.
• Stay outside the operating radius of the Mounting/
Demounting tool.
• Keep hands and fi ngers clear of the whole control
panel support arm. Manouvre the arm by using only
the control unit handle.
• Do not allow unauthorized people in the work area.
• Keeps hands and other parts of the body away from
moving surfaces.
• Only use approved accessories.
• Do not bypass safety devices.
Contact with moving parts may cause injury.
ALWAYS MAINTAIN SAFETY DEVICES IN PERFECT
WORKING ORDER.
IN CASE OF ACCIDENTAL DAMAGE TO ONE OR MORE
PLATES, REPAIR OR REPLACE IMMEDIATELY.
Operator's Manual T 8026