FLAEM RespirAir Mode D'emploi page 5

3. Connect accessories as indicated in the "Connection diagram" on the cover.
4. Sit comfortably holding the nebuliser in your hand, place the mouthpiece onto
your mouth or alternatively use the nose piece or mask. Should you opt for the mask
accessory, place it on your face as shown in the picture
(with or without using the elasticated strap).
5. Turn on the device using the switch (A1) and then
breathe in and exhale deeply.
6. When the treatment is finished, shut off the device and
unplug the power cord.
WARNING: If after the therapy session moisture
accumulates in the tube (B), remove the tube from the
nebulizer and dry it using the device's compressor fan;
this operation will prevent mold from forming inside the tube.
HOW TO USE THE "RF7 DUAL SPEED PLUS" NEBULIZER WITH SPEED SELECTOR AND
VALVE SYSTEM
Professional and fast, this device is suitable for administering all types
of medications, including more expensive ones, even in patients with
chronic diseases. The geometry of the internal lines of the RF7 Dual Speed
Plus nebulizer ensures the ideal granulometry for active treatment all the
way down to the lower respiratory tract.
To speed up the inhalation therapy, move the speed selector button
(C1.4) by pressing on MAX with your finger.
For a more effective inhalation therapy, press on the opposite side of the
word Max located on the speed selector button (C1.4); this allows you to
inhale an optimal amount of the medication and reduces dispersion of
the medication into the surrounding environment to a minimum thanks
to the valve system provided in the nebulizer, mouthpiece, and mask.
SOFTTOUCH FACE MASKS
Soft
biocompatible
material
Dispersion
Limiting Vent
During inspiration the vent
bends inwards.
The new SoftTouch Masks feature an adaptive edge made
of a soft biocompatible material ensuring an excellent
adherence to the face and a Dispersion Limiting Vent.
These innovations, which make them stand out from the
rest, allow increased sedimentation of medication in the
lungs and reduced dispersion into the air.
3
During expiration the vent bends
outwards.
MAX