Loading Wav Files From A Computer - Teac Tascam 16 Mode D'emploi

10 - Using a computer to transfer data

Loading WAV files from a computer

1. Use a USB cable (Type-A to Type-B) to connect the
computer to this unit's USB port. (See "Connecting with a
Computer" on page 49)
2.
Click the "Model 16" drive on the computer to show the
MTR, MUSIC and UTILITY folders.
3.
Drag and drop files on the computer that you want to
transfer to the unit to the MUSIC folder.
ATTENTION
i The UTILITY folder is used when updating the unit system, for
example.
i Do not change names, delete or otherwise alter individual
files inside the MTR folder. Doing so could prevent loading
data as a song and make proper recording and playback
operations impossible.
TIP
i You can manage the content of MTR or MUSIC folders from
the computer.
i You can create subfolders in the MUSIC folder up to the
second level for use with this unit. The Model 16 cannot
recognize sub-folders and files located at the third layer level
or below.
50
TASCAM Model 16