Loading Songs; Saving The Current Song; Viewing Song Information; Clearing All Marks - Teac Tascam 16 Mode D'emploi

4 - Managing Songs

Loading Songs

Use the following procedure to load the song you want.
1.
Open the SONG Screen when the recorder is stopped. (See
"Menu operation procedures" on page 28)
NOTE
The * icon appears for a song currently being loaded. An
icon will appear before protected songs.
2. Select the song that you want to load and press the MULTI
JOG dial to open the menu list pop-up.
3. Select LOAD, and press the MULTI JOG dial.
After the selected song loads, the SONG Screen will reopen.

Saving the current song

Song information, including marks added during playback of
the current song as well as deleted marks, can be saved.
1.
Open the SONG Screen when the recorder is stopped. (See
"Menu operation procedures" on page 28)
2. Select the current song, and press the MULTI JOG dial to
open the menu list pop-up.
3. Select SAVE, and press the MULTI JOG dial.
This saves the song information.
ATTENTION
After saving, undoing or redoing the previous operation will
no longer be possible.

Viewing song information

You can check the song name (title), sampling frequency, bit
rate, size, and date and time last written.
1.
Open the SONG Screen when the recorder is stopped. (See
"Menu operation procedures" on page 28)
2.
Select the song with information that you want to check
and press the MULTI JOG dial to open the menu list pop-
up.
3. Select INFORMATION, and press the MULTI JOG dial.
The INFORMATION Screen will open.
The song name, sampling frequency, bit rate, size, date and
time last written will be shown.
4. After checking, press the F1
SONG Screen.
34
TASCAM Model 16
button to return to the

Clearing all marks

This operation clears all marks added to the selected song.
1.
Open the SONG Screen when the recorder is stopped. (See
"Menu operation procedures" on page 28)
2. Select the song with the marks that you want to delete and
press the MULTI JOG dial to open the menu list pop-up.
3. Select CLR ALL MARKS, and press the MULTI JOG dial.
The CLR ALL MARKS Screen will open.
4. Press the F4 button to confirm deletion of marks.
When mark deletion completes, the SONG Screen reopens.
ATTENTION
Deleted marks cannot be restored.

Deleting songs

You can delete songs.
Deleting unnecessary songs when the SD card space is low can
create more open space.
1.
Open the SONG Screen when the recorder is stopped. (See
"Menu operation procedures" on page 28)
2. Select the song that you want to delete and press the
MULTI JOG dial to open the menu list pop-up.
3. Select DELETE, and press the MULTI JOG dial.
The DELETE Screen will open.
4. Press the F4
button to confirm deletion.
When song deletion completes, the SONG Screen reopens.
ATTENTION
Deleted songs cannot be restored.
NOTE
i To cancel song deletion, press the F1
i The current song cannot be deleted. To delete the current
song, load another song first.
button.