Playing Wav Files On Sd Cards (Sd Play Mode) - Teac Tascam 16 Mode D'emploi

9 - Settings and Information
Playing WAV files on SD cards (SD
PLAY mode)
The WAV files in the MUSIC folder on an SD card can be played
back. (See "Loading WAV files from a computer" on page 50)
The following audio file formats can be played back in SD PLAY
mode.
WAV: 44.1/48kHz, 16/24-bit
BWF: 44.1/48kHz, 16/24-bit
NOTE
Playback signal is sent from channels
1. MODE switch to "MTR".
Set the channel 13/14
2. Set the channel 13/14 MON 1/MON 2 and BAL knobs and
the channel fader to their middle positions.
3. Open the SD PLAY Screen when the recorder is stopped.
(See "Menu operation procedures" on page 28)
4. Select a file to play back.
o Turn the MULTI JOG dial to select a WAV file.
o Press the MULTI JOG dial when a folder is selected to
show its contents.
o Press the F1
button to return to the MENU Screen.
o Press the F2 button to move up one level.
NOTE
Only WAV files can be played back. Unsupported files will not
be shown.
48
TASCAM Model 16
13 and 14.
5. Press the F4
button or 7/9 button to start WAV file
playback.
The SD PLAY Screen will show playback status.
o Press the F1 button to return to the file selection
screen.
o Press the F2 button to turn the repeat playback
function on and select the repeat playback mode.
Display Meaning
The folder that contains the currently
No indicator playing WAV file will play back, and
then playback will stop.
The currently playing WAV file will play
back repeatedly.
The folder that contains the currently
playing WAV file will play back
repeatedly.
o Press the F3 (<<) button to skip to the beginning of the
WAV file. Press near the beginning of the WAV file to
skip to the beginning of the track before it.
o Press the F4 (>>) button to skip to the beginning of the
next WAV file.
6. Press the F1 button twice to return to the MENU
Screen.