Lenze 8200 motec Instructions De Montage page 45

1
8. Insert the bus-I/O function module  into the receptacle in the motec carrier housing
until it snaps into place.
9. Wire the bus-I/O function module.
– Plug the double-row pin strip of the flat flexible cable into the double-row socket
of the fieldbus function module .
– Wire the terminals of the bus-I/O function module , terminal assignment
10. Connect mains and motor (see Mounting Instructions for the 8200 motec).
– Connect PE conductor of mains cable to PE connection .
– Connect PE conductor of motor cable to PE connection .
EDK82ZMFBC-001 DE/EN/FR 7.0
0
2
3

Mechanical installation
Motor mounting
4
E82ZMFB007
52
).
45