Publicité
Les langues disponibles
Les langues disponibles
Surface Units
How Induction Surface Cooking Works
Induction coils under the glass cooking surface produce
a magnetic field that generates heat in ferrous metals
that are in close proximity. The glass cooking surface is
not heated directly since it is not a ferrous metal, but the
glass may eventually become hot from the pan. Induction
surface coils are more efficient and will heat much faster
than conventional electric and gas cooking surface
cooking products.
How to Set
WARNING
To turn on a single surface unit:
1. Touch the On/Off pad; then touch the + or - pad.
Touching the + pad will set the burner to its highest
setting; touching the - pad will set the burner to its
lowest setting.
2. Use the + or - pad to adjust to the desired power
setting.
Using the Warming Zone
WARNING
The Warming Zone is located in the back center of the
glass surface.
To use the Warming Zone:
1. Touch the Warming Zone On/Off pad.
2. Use the + or - pad to choose the desired power setting
(Lo/Med/Hi).
To turn off the Warming Zone:
Touch the Warming Zone On/Off pad.
49-80766-1
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high
settings. Keep flammable items away from the cooktop. Turn off all controls when done
cooking. Failure to follow these instructions can result in fire, serious injury or death.
FOOD POISON HAZARD: Bacteria may grow in food at temperatures below 140°F.
CAUTION:
The induction cooking elements may appear to be cool
while turned ON and after they have been turned OFF.
The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
DO NOT TOUCH HOT COOKWARE or PANS directly
with hands. Always use mitts or pot holders to protect
hands from burns.
DO NOT SLIDE cookware across the cooktop surface.
Doing so may permanently damage the appearance
of the ceramic cooktop.
To use the Power Boil or Melt features:
Touch the On/Off pad for
the corresponding burner.
For power boil, press +; for
melt, press -. The element
will automatically set to a
predetermined setting.
9
Publicité
