Oceanic BC Mode D'emploi page 25

NOTE: The maximum cylinder size that can be used is a single 20 L .
  W ARNING:Itisthediver'sresponsibilitytoassurethatfullyconfigured,readytodive
systems are able to achieve neutral buoyancy at the beginning and end of any dive.
AddingNon-Dropweightscanaddsignificantin-waterweight.
CARE AND MAINTENANCE
Your BC is a reliable piece of equipment that was designed to withstand the rigors of diving and will last
many years, if cared for properly. Follow the procedures below and the recommended annual inspection.
You should have the entire BC inspected annually by your local Authorized Oceanic Dealer to ensure it
is operating properly and that no components are showing signs of wear.
POST DIVE CARE
To keep your BC in top condition. After each day of diving >>
• Fill the BC one third full with fresh water through the Inflator mouthpiece.
• Inflate fully then rotate and shake, ensuring a complete internal rinse.
• Hold upside down, and completely drain the water out through the mouthpiece.
• Rinse the outside of the BC with fresh water.
• Store partially inflated out of direct sunlight in a cool, dry place.
• Periodically add BC disinfectant (available in dive stores) to rinse water to kill any bacterial growth.
• Transport the BC in a padded carrying case or equipment bag separated from sharp items (e.g.;
dive knife, spear gun, etc.) that might puncture the bladder.
• Protect the Inflator System from damage from heavy objects (e.g.; dive light, first stage, etc.).
MAX. 20L
25