Oceanic BC Mode D'emploi page 23

SPECIAL ADJUSTMENT FEATURES
Select model BCs, such as the Hera, are designed with special custom fit Harness that provides for
additional adjustment of the shoulder straps.
Each shoulder strap can be removed from the BC and readjusted by removing screws (Fig. 17),
repositioning the strap, and reinstalling the screws.
To adjust the Shoulder Straps:
• Unclip the straps' quick release buckles and fold the shoulder straps back over the top of the BC
to expose the 4 harness fasteners (Fig. 18).
• While holding the inner portion of a fastener secure with a coin or short wide screwdriver,
remove the outer portion by turning it counterclockwise with a coin or screwdriver (Fig. 19).
• Adjust the strap to the desired position, insert the inner portion of the fastener, and while holding
it secure with a coin or short wide screwdriver, install and tighten the outer portion by turning it
clockwise with a coin or screwdriver.
• All 4 fasteners must be installed and secure (15 in-lbs).
• Close the shoulder strap buckles, and pull the BC on to verify that the adjustment is correct and
comfortable.
Fig. 17
Fig. 18 Fig. 19
23