Oceanic BC Mode D'emploi page 20

QLR WEIGHT RELEASE SYSTEM
Removing QLR3 Pockets from the BC
• Grasp the Handle of the Pocket (Fig. 13) and pull the Pocket straight out of the cavity of the BC.
Loading Weights into the QLR3 Pockets
• Open the Flap of the Pocket and insert the desired Weight (Fig. 14).
• Secure the Flap of the Pocket (Fig. 15).
Installing QLR3 Pockets in the BC
• Slide the Pocket into the cavity of the BC until the Buckle clicks securing it in place (Fig. 16).
Fig. 13
WARNING: Dropping the Weights will present you with immediate positive buoyancy.
20
Fig. 14 Fig. 15 Fig. 16